Thursday, February 23, 2012
4 Square Gifts in the River Market offers its own burger, complete with a slightly sourdough bun, Cheddar cheese, sweet caramelized red oniions, fresh green leaf lettuce and tomato and chipotle aioli. Yet there's no meat component.
But we were in the mood for a hot lunch. My dining companion hadn't been there before and was concerned that whatever we ordered would not be enough to sustain us throughout the afternoon, so we agreed to order hummus and pita chips with our selections.
The peas had been cooked to barely firm for a texture not that dissimilar from
Our hummus ($3.25) shared was pretty standard but with a nice citrus note that gave the concoction a pleasant bite. It was served with pita chips. We had originally considered the Spinach and Artichoke Dip ($6.50), but it was out that day.
So, the 4 Square Burger.
When it came time to go, it was no work at all to pack our leftovers, since everything had been presented to us in biodegradable cartons in the first place. My companion and I were both left with afternoon snacks after our meal. I can in all honesty say it was a good value.
You'll find 4 Square Gifts at 405 President Clinton Avenue in the River Market in downtown Little Rock. It's open at 9:30 a.m. Monday through Saturday and 10:30 a.m. on Sunday, and closes at 7:30 Monday through Thursday, 9 p.m. Friday and Saturday and 4 p.m. on Sunday. Check out the website or call (501) 244-2622.
Thursday, February 16, 2012
But I will tell you there was a lot of frying involved.
I came in, sat down in a booth and asked the waitress what a Leopard Burger was. "It's really, really big," she told me.
"A half pound?"
"I'm not sure. It has bacon."
"Ooh. Well, that's a deal-breaker."
"We can take it off. It's still really good."
It was about a 20 minute wait for the burger, but then it was delivered on a plate. And yes, my waitress was correct, it was a really, really big burger — probably a pound.
The bun, though... I have had buttered buns, I have had toasted buns, I've had toasted and buttered buns — but I swear, it was as if this bun had been fried open-side-down in butter. It had a startling crispness to it, a quarter inch butter ring into the bun (like a smoke ring in a brisket),
My waitress said she thought the buns came from the Mennonite bakery in Harrison, but she wasn't sure. It was soft topped, like a very wide and shallow version of a Boulevard Bread Company bun but with a very white-bread-soft center to it.
The patty itself had been seasoned with just a little salt and pepper and the grease from the grill.
It was impressive. And I took nearly two thirds of that burger home. As I said, it was a big burger. And just phenomenal, too.
But... there is this. When I went to reheat the thing later, it just wasn't as great. That's because all that butter fried into the bun had made the bun tough. Ah well. I had a great experience with it on my initial introduction, and that's what matters to me.
You'll find the Top Rock Drive In on the east side of Alpena on Highway 62. It's open every day, and breakfast is served all the time. How about that? Monday through Saturday 6 a.m. - 7 p.m. and Sunday 6 a.m. to 2 p.m. (870) 437-5238 or check out the Facebook page.
Top Rock Drive In
311 US Highway 62
Alpena, AR 72611
Tuesday, February 7, 2012
It started in 1968 in a garage on Main Street. Forrest and Nina Wood ran a guide service on nearby Bull Shoals lake. The Woods saw the value in making the then heavy, clunky wooden boats used on the lake and on the White River less weighty, more maneuverable and easier to handle. They and his brother Mickey set up shop in a garage on Main Street and made six fiberglass boats that would be the first boats to carry the Ranger name.
The Woods bought an old nightclub on the outskirts of town, the Silver Star, a former stop-in popular with the workers who built Bull Shoals Dam back in the fifties. There they expanded the operation, building 600 boats in 1969 and doubling that in 1970. Boats were $1000, complete with lights and steering.
On May 4th, 1971 fire consumed the plant. The next day some 40 orders were salvaged from an old desk. Several dealers offered to pay for their boats in advance to help fund reconstruction, and friends and family helped clear the slabs. 40 days later, the new plant was in operation.
Ranger Boats started at a time when Americans were turning to the water for fun and pleasure. The innovations that came out of Flippin became industry standards. Ranger became the go-to boat for tournament fishing, especially with Bassmasters and with the operation previously known as Operation Bass -- which was renamed FLW for Forrest L. Wood’s initials.
Mickey Wood was at the front desk of the headquarters building when I walked in the door. We shook hands and he asked me what I wanted to know. I told him I was along for the ride and to share whatever he thought was pertinent.
We headed over to the plant next door in his truck. Past the break room up front we went right into the plant, an operation that seemed to span out a mile in every direction. I followed him through the noise straight back to a section where there were a sea of boat hulls on rolling racks.
First thing into the mold is the color, a blend of glitter and clear gel coat that’s layered in to create the particular color for each boat. There are dozens of different sorts of gel coats, from primary colors to golds and silvers and coppers to teals and ambers and all sorts of blends. They’re sprayed
|The "Indian Hand Signals" left by workers.|
“We build the boats directly into the mold like this,” Wood told me, “then when we pull it out it will be a colored hull.”
The deck is the same way, and those deep and shiny bright colors are also sprayed into a mold that will eventually be reversed and attached to a hull. Every layer of paint goes into the mold before the fiberglass is applied, to give the best definition of every detail.
The next step is the first application of fiberglass. Inch-long fiberglass threads are mixed with a catalyzing agent and a resin and applied to the mold. The cobalt and peroxide resin covers the inside of the mold, dries and becomes a virtually unbreakable solid in a matter of hours. The plant will utilize about 7.5 million pounds of fiberglass thread this year to create these boats.
We watched as a series of crews handled several boats. One team sprayed down a deck with the fiberglass mixture from a special nozzle. The next team went over the deck with brushes and fine tools to make sure the mixture had made it into every nook and cranny in the mold. Another crew was fitting yet another deck with reinforcements, which were in turn sealed in with another layer of fiberglass and gone over by a team with more fine tools.
They’re not all Ranger brand boats. Four brands are built here. Ranger, of course, but also Triton, Stratus and Champion. When the boat market began to sink a few years ago, Ranger acquired these other brands and brought them to Flippin. Each one has its own specifications, but every one has to meet the high quality standards set by the Woods.
Ranger only makes fishing boats -- bass, walleye and multi-species. Some boats are strictly for fishing, others for pleasure… really, it’s up to the consumer. Each one is custom made. If you want a Ranger Boat, you go to the dealership and place your order. There may be a floor sample that the dealership ordered -- but even that boat was custom made for that location.
But why all that fiberglass? Why the emphasis on reinforcements? Wood says it’s to fit the needs of tournament fishermen. “Our boats are meant to go up to 60 to 80 miles an hour on the water,” he told me. “Bass fishermen in tournaments want to get from point A to point B as quickly as they can. They’ll practice for weeks before the tournament on the lake to see where they can find fish.”
“What’s the fastest you’ve recorded a boat at?”
“An eighteen and a half footer with a 250 horsepower motor, with two people and tackle? 78 miles an hour,” Wood said.
From there, we walked back further into the plant, to an area where the hulls are painted and processed. Though the type of fiberglass is different here, the hulls go through the same sort of process as the decks over a 48 hour time period. The biggest difference is in the type of fiberglass strands employed in the composite construction. Within the fiberglass layers in the hull molds, woven robing is placed. This 24 ounce dry fiberglass fabric is impregnated with resin to create an almost impenetrable hard coat.
After several applications of fiberglass and several finishing rounds, the hull is completed. Once it’s dry, it’s paired with its deck. A big yellow frame is used to pick up the deck, slide it over to the hull and carefully drop it into place to be permanently joined. This is when any additional component between the hull and deck is added. For instance, in the Ranger brand boats, there’s a certain type of foam that’s pumped between hull and deck to make it even more unsinkable. The other boats made at the plant have different procedures and different materials -- but once again, it’s all made to far surpass Coast Guard regulations.
Speaking of motors, they’re attached at this point, too -- whichever type the model calls for or the customer asks for -- be it Mercury, Yamaha, Evinrude, Honda or Suzuki. Other bits are added at this point too -- rub rails, dials and fittings all go in before the boat is sent on to the finishing room next door.
Boats aren’t just a means to get where you’re going on a lake any more. Ranger Boats are fully integrated into the 21st Century with top of the line fish finders, GPS onboard satellite locators and all sorts of computers. You can easily sink thousands of dollars into your boat with these custom additions. But people order them.
The Department of the Interior for the State
of Louisiana ordered 75 of these special
made boats to perform patrols. Once
they’re shipped down south, they’ll be
fitted with the appropriate artillery
Then there are roofs -- yes, boat roofs, T-tops to keep the sun off your face and neck. They’re more often added to pleasure crafts, but I saw a few being fitted to tournament boats as well.
After each boat has been assembled and before they leave the plant, each boat is subject to a water test. They’re submerged in a water tank and the pumps and electrical are tested. If there’s anything wrong, the boat will be deconstructed back to the point where the error can be fixed, and then they’re rebuilt. Wood says they’ll go as far as they have to, to fix a problem before a boat is sent out. Everything is checked -- the clamps, the live well, even the radio.
Once the boat is finished and checked over, it’s introduced to its custom built trailer. The trailers are built to accommodate each boat -- aluminum trailers for saltwater boats and channel tube for freshwater boats. They’re designed to perform well at any speed limit and come with similar gel coat and flair to each boat. Once the boat’s on the trailer, a shrink wrap is applied and the boat is ready to go.
The plant will make about 4500 boats this year. That may not seem like a lot -- until you consider the number of people who own a boat. Most folks who purchase a boat purchase it for a lifetime. Boats are handed down through families. Few buy more than one boat -- with the exception of pro fishermen, of course. It’s an investment, but if you take care of a boat it can easily last you a lifetime. That means waxing the hull, properly winterizing the boat and just being smart about boat care.
4500 boats may seem like a lot, but the market has shrank significantly. While some
64,000 boats were made market-wide five years ago, there will be just 9000 new boats made this year. Half of those boats come from Flippin, and Ranger Boats comprise 72 percent of the bass boat market worldwide.
The recession has taken its hit here. Just a few years ago the plant was running 24 hours a day, three shifts of workers hauling tail seven days a week to keep up with the demand. But then the bottom fell out of the market.
Ranger was lucky -- and smart. By acquiring other brands the plant has been kept busy, and layoffs have been stymied. Today workers operate in two shifts over five days a week and are just able to keep up with the demand.
The little boat-making operation has come a long way, and it’s guaranteed a great future for the Flippin community. Thanks to good decisions and a great product, Ranger Boats should be around for a long time to come.
At every major bass tournament -- and a lot of the smaller ones, too -- you’ll find the Ranger repair team. Mickey Wood says the team helps get every boat -- not just Ranger Boats -- back on the water. He says it’s a simple philosophy.
“You never want to burn bridges, because you never know when that guy might want to fish from your boat.”
TV show “The Fishing Hole,” the longest running fishing program in television history. Today the boat Jerry McKinnis used in the early days of that program resides at the Forrest L. Wood Outdoor Sports Gallery, just south of the Ranger Boat facility in Flippin.
program in 1979, when the then-fledgling ESPN network picked it up. McKinnis still
lives in Flippin, having fallen in love with the area. Each year, thousands of Ranger Boat fans pass through the museum while they’re in the area, whether it be for vacation or a tournament. It’s open Tuesdays and Thursdays. The two-story gallery features hundreds of magazine covers heralding Ranger Boats, plus all sorts of memorabilia and a taxidermy collection. It’s something to see.
For more information on Ranger Boats, check out the website. There's also a website for the museum.